Alinco DJ-X-7 E hand-held scanner 1839 Data Sheet

27

Advanced

Operations

This function detects a CTCSS tone frequency of the receiving
signal automatically.

This starts the Tone Scan function. The scanned CTCSS tone
will be displayed on the LCD. When it is detected, the 
icon appears on the LCD and the scanning stops.

This returns to the VFO mode.

This function continues scanning until it detects a tone.
When you wish to suspend or stop the function, press any key
other than the 

key or the [MONI] key.

This function switches to receive another frequency with the
one-touch operation while receiving the other. This feature is
useful to receive both repeaters' uplink and downlink signals.

Every time you press the key, the display changes as follows.

When you rotate the dial while holding the 

key down, you

can tune frequency in the unit of 1MHz except the band .100 (T
and E version) and the band .531 (E version).

Releasing the 

key returns to the current frequency

reception.

As a nature of repeater signals, it is not always able to
receive both signals. The uplink stations must be close
to you to receive them. Otherwise, you may hear only
the downlinks.

「oFF」 

Shift freq.

Shift freq.