Alinco DJ-X-7 E hand-held scanner 1839 Data Sheet

32

Set

M

ode

C

onfigurations

When you set it to ON, the 

icon appears on the LCD.

With the 

icon ON, the power is automatically turned off

if there is no key operation for the specified period of time. Just
before turning it off, a beep sound will be heard. To turn the
power ON, hold the power key for 1 second.

Any key operations can reset countdown for the APO
(Auto-Power-Off) and extend the APO time. However,
the APO time is not extended only by receiving signals.

This function prevents wasting battery power by making the
internal circuit dormant at a constant ratio.
When you set this function to ON, the receiver will be in the
hibernation state if no key operation or no reception continues
for 5 seconds.
Set it to ON for normal operations.

The following is displayed on the LCD.

When you set it to ON, the 

icon appears on the LCD.

• The default is set to ON.
• This function becomes invalid temporarily while the DJ-X7 is

scanning or receiving signals.

• The LCD displays even when the DJ-X7 is in the hibernation

state.

This function sounds a beep during operations. If you feel noisy
or annoying, you may turn off the sound.

The following is displayed on the LCD.

This function is like a pager (beeper). The DJ-X7 informs you
with a bell sound that it received a signal.

The following is displayed on the LCD.

Memo

「oF」 

「30」 

「60」 

「90」