Uniden UBC 92 XLT handheld scanner 122C11 Data Sheet

45

program a delay depending on how the scanner is 
operating.
•

If the scanner is scanning and stops on an active 
channel where you want to store a delay, quickly 
press Func + 5/Dly before it continues scanning 
again. DLY appears.

•

If the desired channel is not selected, manually 
select the channel, then press Func + 5/Dly. 
DLY appears.

•

If the scanner is searching, press Func + 5/Dly 
while the scanner is searching. DLY appears and 

the scanner automatically adds a 2-second 
delay to every frequency it stops on in that band.

To turn off the 2-second delay, press Func + 5/Dly 
while the scanner is monitoring a channel, scanning, 
or searching. DLY disappears.

Close Call also has a delay feature. It's delay time is 
10 seconds. See page 36 how to program Close 
Call Delay.

You can turn each channel-storage bank on and off. 
When you turn off a bank, the scanner does not 
scan any of the 20 channels in that bank.

While scanning, press the number key that 
corresponds to the bank you want to turn on or off. 
Numbers appear at the top of the display, showing 
the currently selected banks.

The scanner scans all the channels within the 
displayed banks that are not locked out (see “Lock-
ing Out Channels” on Page 46). The bank number 
flashes when the scanner scans a channel that 
belongs to the bank.

UB340ZH Paper OM reduced size.fm  Page 45  Monday, September 26, 2005  2:56 PM