Uniden UBC 92 XLT handheld scanner 122C11 Data Sheet
Product codes
122C11
47
Special Features
Follow these steps to select a different channel in a
bank as the priority channel.
1. Manually select the channel you want to select
bank as the priority channel.
1. Manually select the channel you want to select
as the priority channel.
2. Press Func + E/Pgm, then press Func + 1/Pri.
P
appears to the left of the selected channel
number.
3. Repeat Steps 1 and 2 for the channel in each
bank you want to program as a priority channel.
To turn on the priority feature, press Func + 1/Pri
during scanning. PRI appears. Then the scanner
during scanning. PRI appears. Then the scanner
checks the designated priority channel every
2 seconds in each bank.
2 seconds in each bank.
To turn off the priority feature, press Func + 1/Pri.
PRI disappears.
PRI disappears.
Using Keylock
Use the scanner's keylock to protect it from
accidental program changes. When the scanner's
keys are locked, the only controls that operate are
Scan/Src, Func, Hold/
accidental program changes. When the scanner's
keys are locked, the only controls that operate are
Scan/Src, Func, Hold/
, /
, and
.
To turn on keylock, press Func + /
.
appears. To turn off keylock, press Func + /
.
disappears.
Note: Using keylock does not prevent the scanner
from scanning channels.
from scanning channels.
Using the Display Backlight
To turn on the display light for easy viewing at night,
press /
press /
. The display lights for 15 seconds. To
turn off the light sooner, press /
again.
UB340ZH Paper OM reduced size.fm Page 47 Monday, September 26, 2005 2:56 PM