Microchip Technology MA330025-1 Data Sheet
2009-2012 Microchip Technology Inc.
DS70616G-page 393
dsPIC33EPXXX(GP/MC/MU)806/810/814 and PIC24EPXXX(GP/GU)810/814
REGISTER 22-6:
UxCON: USB CONTROL REGISTER (HOST MODE)
U-0
U-0
U-0
U-0
U-0
U-0
U-0
U-0
—
—
—
—
—
—
—
—
bit 15
bit 8
R-x, HSC
R-x, HSC
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
JSTATE
SE0
TOKBUSY
USBRST
HOSTEN
RESUME
PPBRST
SOFEN
bit 7
bit 0
Legend:
U = Unimplemented bit, read as ‘0’
R = Readable bit
W = Writable bit
HSC = Hardware Settable/Clearable bit
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-8
Unimplemented: Read as ‘0’
bit 7
JSTATE: Live Differential Receiver J State Flag bit
1 = J state (differential ‘0’ in low-speed, differential ‘1’ in full-speed) is detected on the USB
0 = No J state is detected
1 = J state (differential ‘0’ in low-speed, differential ‘1’ in full-speed) is detected on the USB
0 = No J state is detected
bit 6
SE0: Live Single-Ended Zero Flag bit
1 = Single-ended zero is active on the USB bus
0 = No single-ended zero is detected
1 = Single-ended zero is active on the USB bus
0 = No single-ended zero is detected
bit 5
TOKBUSY: Token Busy Status bit
1 = Token is being executed by the USB module in On-The-Go state
0 = No token is being executed
1 = Token is being executed by the USB module in On-The-Go state
0 = No token is being executed
bit 4
USBRST: USB Reset bit
1 = USB Reset has been generated; for Software Reset, application must set this bit for 50 ms and
1 = USB Reset has been generated; for Software Reset, application must set this bit for 50 ms and
then clear it
0 = USB Reset is terminated
bit 3
HOSTEN: USB Host Mode Enable bit
1 = USB host capability is enabled; pull-downs on D+ and D- are activated in hardware
0 = USB host capability is disabled
1 = USB host capability is enabled; pull-downs on D+ and D- are activated in hardware
0 = USB host capability is disabled
bit 2
RESUME: USB Resume Signaling Enable bit
1 = Resume signaling is activated; software must set the bit for 10 ms and then clear to enable remote
1 = Resume signaling is activated; software must set the bit for 10 ms and then clear to enable remote
wake-up
0 = Resume signaling is disabled
bit 1
PPBRST: Ping-Pong Buffers Reset bit
1 = Resets all Ping-Pong Buffer Pointers to the EVEN buffer descriptor banks
0 = Ping-Pong Buffer Pointers are not reset
1 = Resets all Ping-Pong Buffer Pointers to the EVEN buffer descriptor banks
0 = Ping-Pong Buffer Pointers are not reset
bit 0
SOFEN: USB Start-of-Frame (SOF) Enable bit
1 = Start-of-Frame token is sent every one 1 ms
0 = Start-of-Frame token is disabled
1 = Start-of-Frame token is sent every one 1 ms
0 = Start-of-Frame token is disabled