Microchip Technology TDGL019 Data Sheet

© 2011-2014 Microchip Technology Inc.

DS60001168F-page 245

This section provides an overview of the PIC32MX1XX/2XX electrical characteristics for devices that operate at
40 MHz. Refer to 

 for additional specifications for operations at

higher frequency. Additional information will be provided in future revisions of this document as it becomes
available. 
Absolute maximum ratings for the PIC32MX1XX/2XX devices are listed below. Exposure to these maximum rating
conditions for extended periods may affect device reliability. Functional operation of the device at these or any other
conditions, above the parameters indicated in the operation listings of this specification, is not implied.

Ambient temperature under bias.............................................................................................................-40°C to +105°C
Storage temperature .............................................................................................................................. -65°C to +150°C
Voltage on V

DD

 with respect to V

SS

  .........................................................................................................  -0.3V to +4.0V

Voltage on any pin that is not 5V tolerant, with respect to V

SS

 (Note 3)......................................... -0.3V to (V

DD

 + 0.3V)

Voltage on any 5V tolerant pin with respect to V

SS

 when V

DD

 

≥ 2.3V (Note 3)........................................  -0.3V to +5.5V

Voltage on any 5V tolerant pin with respect to V

SS

 when V

DD

 < 2.3V (Note 3)........................................  -0.3V to +3.6V

Voltage on D+ or D- pin with respect to V

USB3V3

..................................................................... -0.3V to (V

USB3V3

 + 0.3V)

Voltage on V

BUS

 with respect to V

SS

  .......................................................................................................  -0.3V to +5.5V

Maximum current out of V

SS

 pin(s) .......................................................................................................................300 mA

Maximum current into V

DD

 pin(s) (Note 2)............................................................................................................300 mA

Maximum output current sunk by any I/O pin..........................................................................................................15 mA
Maximum output current sourced by any I/O pin ....................................................................................................15 mA
Maximum current sunk by all ports .......................................................................................................................200 mA
Maximum current sourced by all ports (Note 2)....................................................................................................200 mA

Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the
device. This is a stress rating only and functional operation of the device at those or any other conditions,
above those indicated in the operation listings of this specification, is not implied. Exposure to maximum
rating conditions for extended periods may affect device reliability.

Maximum allowable current is a function of device maximum power dissipation (see 

See the “

 section for the 5V tolerant pins.