Voltcraft CPPS-160-42, 1 Output Variable DC Power Supply, , Bench CPPS-160-42 User Manual
Product codes
CPPS-160-42
58
No voltage should be applied t contacts 4 and 5.
14. RESETTING THE FACTORY DEFAULTS
1. Press and hold the MENU (8) button for approximately 3 seconds.
2. Turn the setting controller VOLTAGE (4) until the following display appears
2. Turn the setting controller VOLTAGE (4) until the following display appears
3. Then press the setting controller VOLTAGE (4) to reach the setting mode.
4. Turn the CURRENT (5) setting controller. "Yes“ or "No“ appears in the right display.
5. Select "Yes" and then press the setting controller VOLTAGE (4) to confirm the selection and
4. Turn the CURRENT (5) setting controller. "Yes“ or "No“ appears in the right display.
5. Select "Yes" and then press the setting controller VOLTAGE (4) to confirm the selection and
return to the setting mode.
6. Then press the MENU (8) button, to leave the setting mode The laboratory network device
starts again with the values set by the factory.
1182100-1182103_v1_1114_02_m_(3).indb 58
5/11/14 18:24