Voltcraft CO-100 Room Air Meter CO-100 Data Sheet

When the upper CO

2

 threshold is exceeded („ALARM2“, see chapter 9 c), factory settings

1200ppm), a loud signal sound is emitted in addition to the red LED lighting up.

This signal sound can be muted, e.g. to switch it off during programming.

• Briefly press the „MODE“ button repeatedly (from the normal operating mode) until

„MUTE“ flashes on the display.

• Briefly press the button „ENTER“; the medium display line shows „ON“ or „OFF“.

„ON“ = muting active, signal sound off

„OFF“ = muting not active, signal sound on

• Select between „ON“ and „OFF“ using the arrow buttons „“ or „“.

• Briefly press the button „ENTER“ to save the setting.

• The signal sound settings are now displayed at the top:

 

 = muting active, signal sound off

 

 = muting not active, signal sound on