Voltcraft CO-100 Room Air Meter CO-100 Data Sheet

In operation, the CO

2

 meter stores the highest and lowest CO

2

 value measured. This

enables, e.g., quick determination of peak loads.

This maximum and minimum memory can, of course, be reset.

• Briefly press the „MODE“ button repeatedly (from the normal operating mode) until

„MAX MIN“ flashes on the display.

• Briefly press the „ENTER“ button. The display now alternates between maximum and

minimum CO

2

 concentration values and the corresponding temperature / humidity.

• If the maximum and minimum value is to be reset, briefly press one of the arrows „“

and „“, so that „CLR“ appears on the display (press the arrow again to leave deletion
mode again).

Briefly press the „ENTER“ button while „CLR“ is displayed to reset the maximum and
minimum values to the current measured value. The CO

2

 meter returns to normal

display.

¼

The current measured value is displayed as the new maximum and minimum value
until another change happens.

• If the values are not to be reset, briefly press one of the errors. „CLR“ disappears. Then

briefly press the „ENTER“ button. The CO

2

 meter returns to normal display.