Bosch AKE 35 0 600 834 001 Data Sheet

 

Carefully remove the machine from its packaging
and check for complete contents:

– Chain saw

– Cover plate

– Chain

– Chain bar

– Oil filler cap

– Chain guard

– Operating instructions

– Adjusting Tool

When parts are missing or damaged, please contact your 
dealer.

 1 Rear handle

 2 On/Off switch

 3 Safety lock

 4 Oil filler cap

 5 Activation lever for kickback brake (hand guard)

 6 Front handle

 7 Nose sprocket (AKE 35/40 only)

 8 Chain guard

 9 Chain

 10 Chain bar

 11 Gripping teeth

 12 Cover plate

 13 Adjusting tool

 14 Locking nut

 15 Fastening bolt

 16 Chain tensioning peg

 17 Chain tensioning screw

 18 Guide fins for chain bar

 19 Oil outlet

 20 Symbol for rotation and cutting direction

 21 Drive sprocket

 22 Chain catch bolt

 23 Mains plug**

 24 Power supply cable*

 25 Serial Number

 26 Oil-level indicator

 27 Ventilation slots

**Country specific

*Not all of the accessories illustrated or described are 
included as standard delivery.

Your machine is double insulated for safety and re-
quires no earth connection. The operating voltage is
230 

V 

AC, 50 

Hz (for non-EU countries 220 

V,

240 V as applicable). Only use approved extension
cables. Extension cords/leads should only be used
if they comply with H07 

RN-F types or IEC

(60 245 IEC 66).

If you want to use an extension cable when operat-
ing your product, only the following cable dimen-
sions should be used:

– 1.0 mm

2

: max length 40 m

– 1.5 mm

2

: max length 60 m

– 2.5 mm

2

: max length 100 m

It is recommended for increased electrical safety to
use a Residual Current Device (RCD) with a tripping
current of not more than 30 mA. Always check your
RCD every time you use it.

For products not sold in GB: WARNING: For safety,
it is essential that the mains plug 23 attached to the
machine is fitted to the power supply cable 24 as
shown.

The couplings of connection leads must be pro-
tected against splashes and the coupling sockets on
the leads must be made of rubber or coated with rub-
ber.

Fixing means for the connection leads must be used.

The connection lead must be inspected for signs of
damage at regular intervals and may only be used if
in perfect condition.

If the supply cord is damaged, it must be replaced by
a Bosch Service Centre.

Products sold in GB only: Your chain saw is fitted
with an approved 13 A (BS 1363/A) electric plug and
is protected by a 13 A fuse (ASTA Approved to
BS 1362).

If the fitted plug is not suitable for your socket out-
lets, it should be cut off and an appropriate plug fitted
in its place by an authorized customer service agent.

The severed plug must be disposed of to avoid a
possible shock hazard and should never be inserted
into a 13 A socket elsewhere.

F 016 L70 721 - Buch  Seite 4  Donnerstag, 11. Februar 2010  3:37 15

20 • F 016 L70 721 • 10.02