Atmel Evaluation Kit for the SAM4E Series of Flash Microcontrollers ATSAM4E-EK ATSAM4E-EK Data Sheet
![Atmel](https://files.manualsbrain.com/attachments/0369829915bda09f9c2e00fb805a7753579683b5/common/fit/150/50/8d2bf08978ec3e5bc63f4343ac5e91ce8d0e40045619fa520d910d64af8f/brand_logo.png)
Product codes
ATSAM4E-EK
1347
SAM4E [DATASHEET]
Atmel-11157D-ATARM-SAM4E16-SAM4E8-Datasheet_12-Jun-14
Figure 45-4.
EOCx and DRDY Flag Behavior
If the AFEC_CDR is not read before further incoming data is converted, the corresponding Overrun Error (OVREx)
flag is set in the Overrun Status Register (AFEC_OVER).
flag is set in the Overrun Status Register (AFEC_OVER).
Likewise, new data converted when DRDY is high sets the GOVRE bit (General Overrun Error) in AFEC_ISR.
The OVREx flag is automatically cleared when AFEC_OVER is read, and GOVRE flag is automatically cleared
when AFEC_ISR is read.
when AFEC_ISR is read.
Read the AFEC_CDR
with ADC_CSELR.CSEL = x
with ADC_CSELR.CSEL = x
EOCx
DRDY
Read the AFEC_LCDR
CHx
(AFEC_CHSR)
(AFEC_ISR)
(AFEC_ISR)
Write the AFEC_CR
with START = 1
with START = 1
Write the AFEC_CR
with START = 1
with START = 1