Conrad Digital Thermometer Module With LED Display Kit 192147 Data Sheet
Product codes
192147
Important! Must read!
The warranty claim becomes null and void in case of damages arising out of non-
adherence to the instructions for use. We do not assume any liability for
consequential damages caused by this.
adherence to the instructions for use. We do not assume any liability for
consequential damages caused by this.
Table of contents
Page
Operating conditions…………………………………………………………………………….3
Intended use……………………………………………………………………………………...5
Safety guidelines…………………………………………………………………………………5
Product description………………………………………………………………………………7
Description of circuit……………………………………………………………………………..8
Technical data…………………………………………………………………………………..11
General instructions for building a circuit…………………………………………………….12
Soldering instructions…………………………………………………………………………..15
1. Construction stage I…………………………………………………………………………17
Circuit diagram………………………………………………………………………………….25
Component diagram……………………………………………………………………………26
2. Construction stage II………………………………………………………………………...27
Checklist for troubleshooting………………………………………………………………….28
Equalisation……………………………………………………………………………………..30
Fault……………………………………………………………………………………………...32
Warranty…………………………………………………………………………………………32
Note
Persons who produce a building kit or make an assembly operational through extending
or fitting a casing are considered as manufacturers in accordance with DIN VDE 0869
and are committed to provide all accompanying papers when supplying the device and
also to state his name and his address. Devices that are put together as assemblies are
to be considered as an industrial product in accordance with technical safety regulations.
or fitting a casing are considered as manufacturers in accordance with DIN VDE 0869
and are committed to provide all accompanying papers when supplying the device and
also to state his name and his address. Devices that are put together as assemblies are
to be considered as an industrial product in accordance with technical safety regulations.
Operating conditions
• The assembly may be operated only at the prescribed voltage.
• In case of devices with an operating voltage ≥ 35 volt the final assembly may be
• In case of devices with an operating voltage ≥ 35 volt the final assembly may be
done only by an expert in accordance with the VDE-guidelines.