Conrad Digital Thermometer Module With LED Display Kit 192147 Data Sheet
Product codes
192147
• The device can be operated in any position.
• The permissible ambient temperature (room temperature) may not fall short of or
• The permissible ambient temperature (room temperature) may not fall short of or
exceed 0°C and 40°C respectively during operation.
• The device is intended for use in dry and clean rooms.
• In case condensation takes place, an acclimatisation period of up to 2 hours must be
• In case condensation takes place, an acclimatisation period of up to 2 hours must be
given.
• It is not permitted to operate the device in the open or in wet rooms!
• It is advisable to cushion the component properly, in case it is subject to strong
• It is advisable to cushion the component properly, in case it is subject to strong
shocks or vibrations. However, please keep in mind that components can get heated
up on the board and can cause fires, if a combustible material is used for cushioning.
up on the board and can cause fires, if a combustible material is used for cushioning.
• The device must be kept away from flower vases, bath tubs, washbasins and all
liquids.
• Protect this component against moisture, splash water and effect of heat!
• The device may not be used together with easily inflammable and combustible
• The device may not be used together with easily inflammable and combustible
liquids!
• Assemblies and parts should not fall in the hands of children!
• The assemblies may be made operational only under supervision of a competent
• The assemblies may be made operational only under supervision of a competent
adult or an expert!
• In industrial premises the accident prevention guidelines of the professional
association of the specific industry for electrical systems and resources must be
observed.
observed.
• In schools, educational institutions, hobby classes and self-help workshops the
operation of the assemblies must be monitored by a trained person responsibly.
• Do not operate the assembly in an area, where combustible gases, vapours or dust
is present or else can be present.
• Use only the original spare parts, if the device needs to be repaired! Use of any parts
other than the original can lead to damage to property and person!
• The device may be repaired only by an expert!
• After use, the device must always be disconnected from the power supply!
• The device can be damaged, if a liquid penetrates in it. In case you have spilt any
• After use, the device must always be disconnected from the power supply!
• The device can be damaged, if a liquid penetrates in it. In case you have spilt any
liquid in or over the assembly, then get the device checked by a qualified expert.
Intended use
The intended use of the device is the measurement of temperatures with an external
sensor in the range from -50° to +150° Celsius.
sensor in the range from -50° to +150° Celsius.
A use other than the intended one is not permitted!