Kaiser Nienhaus 136050 N/A 136050 Data Sheet

Tubular motor with integrated reciever

Tubular motor with integrated reciever

50

One intermediate position can be programmed by the end user and easily deleted or modified when 

required. The intermediate position can be reached from any point between the end limits.

-  move the shutter/awning by using the buttons of the transmitter and stop it at the desired  

  intermediate position.

-   then press simultaneously UP and DOWN buttons till the motor jogs. 

The intermediate position is memorized.

    Press and hold the button (for more than 5 seconds) till the motor starts to move towards the  

    intermediate position.

  Press simultaneously UP and DOWN buttons till the motor jogs. The intermediate position is deleted.

50

AXEL50RI_230V_EN_12/2009

1. Press and hold PROG-TX button of the MASTER transmitter till the motor starts moving. The motor is  

  now in the programming mode;

2. Check the motor direction then release the PROG-TX button and press the UP or DOWN button of the  

  new transmitter within 5 seconds. In this way you have set the new transmitter in the motor’s receiver.

To cancel transmitters from the motor’s memory, press PROG-TX and STOP buttons of the MASTER 

transmitter simultaneously and release them when the motor jogs indicating that every transmitter is 

deleted.

To cancel transmitters from the motor’s memory when the original transmitter is lost:

1. Cut the power;

2. Press first PROG-TX and STOP buttons of any transmitter of the same type;

3. switch-on the power and wait for the motor to jog, indicating that any transmitter is deleted.

1

2

2a

2b

3