Graupner Hendheld RC 2.4 GHz No. of channels: 12 33124 Data Sheet

Product codes

33124

Detail program description - Copy / Erase

Copy model

 model

Select the "Copy model

 model" sub-menu with the

 arrow keys of the left or right touch pad then press
the

SET

button.

SEL

–––

0:00
0:00
0:00

0s
0s

–––
–––
–––
–––

SEL

Timer1
Timer2
Timer3
Lap time/tim tab
Lap Display

Select the model to be copied with the

 arrow keys

of the left or right touch pad …

TELEMETRY

SETTING & DATA VIEW

SENSOR SELECT
RF STATUS VIEW
VOICE TRIGGER

TEL.RCV

BIND. 1

… whereby a second activation of the

SET

button in the

right touch pad will allow the "Copy to model" window
for the destination memory to be selected with the
 arrow keys of the left or right touch pad and then
confi rmed with yet another press of the

SET

button or

canceled with the

ESC

button. A memory location which

is already occupied can be overwritten.

bind

BD1

GRAUBELE

BD2

R12

Mod.name
Stick mode
RF BIND

n/a

BASIC SETTINGS, MODEL

Rcv Ch Map

n/a

SEL

STARLET

Mod.name
Stick mode
RF BIND

n/a

BASIC SETTINGS, MODEL

n/a

RF transmit

OFF

… to appear. A

response will cause the process to be

canceled and a return to the previous screen. Selecting
the YES response with the





arrow keys of the left or

right touch pad followed by confi rmation of the selection
by briefl y pressing the

SET

button will erase the selected

model memory.

Attention:
This erase process cannot be undone. All data in the
selected model memory will be erased completely.

Notice:
If the currently active model memory is to be erased,
a model type "Winged" or "Heli" must be defi ned
immediately after the erase process. On the other hand,
if an inactive memory location is to be erased then it
will subsequently appear in the model select screen as
"



free



Copy / Erase

Erase or copy model

 model, copy from or to SD card, copy fl ight phases

Select the "Copy / Erase" menu with the

arrow

keys of the left or right touch pad then briefl y press the

SET

button.

Suppress models

Model select

Base setup model
Model type

Copy / Erase

Suppress menus

Erase model

Model select

Base setup model
Model type

Copy / Erase

Suppress models

Suppress:

TOG

Select the "Erase model" sub-menu with the

 arrow

keys of the left or right touch pad then briefl y press the

SET

button.

Use the

 arrow keys of the left or right touch pad to

select the model to be erased …

Model select

Base setup model
Model type

Copy / Erase

Suppress models

Suppress:

TOG

… now the next time the

SET

button is pressed, it will

prompt the confi rmation request …