Graupner Hendheld RC 2.4 GHz No. of channels: 12 33124 Data Sheet
Product codes
33124
65
Detail program description - Copy / Erase
Once selection of the model memory has been
confi rmed by pressing the
confi rmed by pressing the
SET
button, a confi rmation
request will appear.
modell really
ULTIMATE
to be copied?
NO
YES
01
03
03
frei
A
NO
response will cancel the process and return the
screen to the originating screen. If the
YES response
is selected and confi rmed by activating the
SET
button
then the selected source model will be copied into the
selected model memory destination.
selected model memory destination.
Notice:
In addition to model data, binding data is also copied by
this process. This means that a receiver system which
was/is bound to the original model memory can also be
operated by its copy without establishing the bond again.
In addition to model data, binding data is also copied by
this process. This means that a receiver system which
was/is bound to the original model memory can also be
operated by its copy without establishing the bond again.
Export to SD
Select the "Export to SD" sub-menu with the
arrow
keys of the left or right touch pad and press the
SET
button.
=>
=>
=>
=>
=>
=>
=>
=>
=>
=>
=>
Copy flight phase
Erase model
Copy model–>model
Expor t to SD
Impor t from SD
Copy model–>model
Expor t to SD
Impor t from SD
Select the model to be exported with the
arrow
keys of the left or right touch pad.
01
03
04
04
05
frei
ULTIMATE
02
GRAUBELE
STARLET
BELL47G
BELL47G
expor t to SD-CARD:
R12
R12
R12
–––
–––
After confi rming the selected model memory by pressing
the
the
SET
button, a confi rmation request will appear.
modell
ULTIMATE
expor t ?
NO
YES
01
SD-Kar te
SD-Kar te
A
NO
response will cancel the process and return the
screen to the originating screen. However, if the
YES
response is selected then confi rmed by pressing the
SET
button, the selected model will be copied to the SD card.
Notice:
Should the notice …
•
SD-CARD
INSERT
OK
… appear instead of a screen for model selection,
there is no SD card in the transmitter's card slot, see
page 22.
In addition to model data, binding data is also copied
there is no SD card in the transmitter's card slot, see
page 22.
In addition to model data, binding data is also copied
•
by this process. This means that a receiver system
which was/is bound to the original model memory
can also be operated in the SAME transmitter by its
copy without establishing the bond again.
An exported winged aircraft model will be stored
which was/is bound to the original model memory
can also be operated in the SAME transmitter by its
copy without establishing the bond again.
An exported winged aircraft model will be stored
•
on the memory card in the \\Models\mx-20 folder
with a fi lename format of "aModellname.mdl"
and a helicopter model with a fi lename format
of "hModellname.mdl". On the other hand, if a
"nameless" model is exported, its data will be stored
on the memory card under "ahNoName.mdl" or
"hNoName.mdl", as appropriate.
Some special characters that can be used in model
with a fi lename format of "aModellname.mdl"
and a helicopter model with a fi lename format
of "hModellname.mdl". On the other hand, if a
"nameless" model is exported, its data will be stored
on the memory card under "ahNoName.mdl" or
"hNoName.mdl", as appropriate.
Some special characters that can be used in model
•
names are subject to specifi c restrictions associated
with the FAT or FAT32 fi le system used by the
memory cards and these special characters will be
replaced during the copy process with a tilde (~).
A model fi le already on the memory having the same
with the FAT or FAT32 fi le system used by the
memory cards and these special characters will be
replaced during the copy process with a tilde (~).
A model fi le already on the memory having the same
•
name as the fi le to be copied will be overwritten
without warning.
without warning.