Buffalo LinkStation 441D 12TB LS441D1204-EU Data Sheet
Product codes
LS441D1204-EU
34
Working with RAID Arrays
To change RAID settings, navigate to Drives - RAID in Advanced Settings.
Using JBOD
With JBOD, each hard drive in the LinkStation is addressed separately. To put drives from an array into JBOD mode,
follow the steps below.
follow the steps below.
1
In Advanced Settings, click Drives.
2
Click
to the right of "RAID".
3
Click the array to delete.
4
Click Delete RAID Array.
Note: If RAID array deletion fails, restart the LinkStation and try again.
5
The "Confirm Operation" screen will open. Enter the confirmation number, then click OK.
Once JBOD is configured, create shared folders on each drive to use them.
Changing RAID Mode
To change the RAID mode, first put the drives in JBOD.
1
In Advanced Settings, click Drives.
2
Click
to the right of "RAID".