Intel III Xeon 900 MHz 80526KY9002M Data Sheet

Product codes
80526KY9002M
Page of 103
PENTIUM® III XEON™ PROCESSOR AT 600 MHz to 1  GHz with 256KB L2 Cache
BOXED PROCESSOR  SPECIFICATIONS
82
9. BOXED PROCESSOR SPECIFICATIONS
9.1 Introduction
The Pentium® III Xeon™ processor at 600 MHz+ is also offered as an Intel boxed processor. Intel boxed
processors are intended for system integrators who build systems from baseboards and off-the-shelf
components. The boxed Pentium III Xeon processor at 600 MHz+ is supplied with an attached passive heat
sink. This section documents baseboard and system requirements for the heat sink that will be supplied with
the boxed Pentium III Xeon processor at  600 MHz+. This section is particularly important for OEMs that
manufacture baseboards for system integrators. Unless otherwise noted, all figures in this chapter are
dimensioned in inches. Figure 33 shows a mechanical representation of the boxed Pentium III Xeon processor
at 600 MHz+.
Figure 33.  Boxed Pentium III Xeon processor at 600 MHz+
9.2 Mechanical Specifications
This section documents the mechanical specifications of the boxed Pentium III Xeon processor at 600 MHz+
heat sink.
The boxed processor ships with an attached passive heat sink. Clearance is required around the heat sink to
ensure proper installation of the processor and unimpeded airflow for proper cooling. The space requirements
and dimensions for the boxed processor are shown in Figure 34 (Side View),  Figure 35 (Front View), and
Table 47.  All dimensions are in inches.