Brother LK3-B484 Owner's Manual
114
ZE-8570,8580
7. USING THE OPERATION PANEL
7. VERWENDUNG DER BEDIENUNGSTAFEL
7. UTILISATION DU PANNEAU DE COMMANDE
7. USO DEL TABLERO DE CONTROLES
7. VERWENDUNG DER BEDIENUNGSTAFEL
7. UTILISATION DU PANNEAU DE COMMANDE
7. USO DEL TABLERO DE CONTROLES
■ Setting the zigzag width for end backtack stitches (additional DIP switch function)
(Be sure to turn off the power before changing any of the DIP switch settings. Refer to page 185.)
Zigzag width for section D end
backtack stitches
backtack stitches
Zigzag width
When DIP switch 2-5 inside the control box is set to OFF,
the zigzag width for end backtack stitches can be set sepa-
rately from the normal zigzag width. (You must set the
start backtack zigzag width at this time too. Be sure to
make this setting if carrying out start backtack sewing
too.)
the zigzag width for end backtack stitches can be set sepa-
rately from the normal zigzag width. (You must set the
start backtack zigzag width at this time too. Be sure to
make this setting if carrying out start backtack sewing
too.)
1462M
1463M
1464M
Zigzag width
for section C
end backtack
stitches
for section C
end backtack
stitches
1524M
e
r
w
q
t
Turning the end backtack function on and off
•
The condition changes as shown below each time the end backtack key
q is pressed.
•
End backtacking is carried out when the end backtack indicator
w is illuminated.
1. Press the end backtack key
q.
•
The indicator
w will illuminate and the end
backtacking function will turn on.
•
The CD indicator
e will illuminate and the number
of end backtack stitches will appear in the LED dis-
play
play
r.
2. To change the number of end backtack stitches, use
the
쑶쑴 selection keys t to change the setting value.
3. Press the end backtack key
q once more.
•
The indicator
w and the CD indicator e will re-
main illuminated, and the tack width indicator
y
will also illuminate.
•
The zigzag width for the end backtack stitches will
appear in the LED display
appear in the LED display
r. (For example,
AA AA
indicates widths of 1.5 mm for section C and 3.0
mm for section D and that end backtacking will be
carried out.)
mm for section D and that end backtacking will be
carried out.)
4. Use the
쑶쑴 selection keys t to change the zigzag
widths.
5. When sewing is carried out and then the treadle is
depressed backward, end backtacking will be carried
out. (For the ZE-8580, the thread will then be trimmed.)
out. (For the ZE-8580, the thread will then be trimmed.)
e
r y
t
w
q
Zigzag width
for section C
for section C
Zigzag width
for section D
for section D
Zigzag width display, etc.
Zigzag width display
Number of end
backtack stitches
backtack stitches
Off
Illuminated
Zigzag width for end
backtack stitches
backtack stitches
1492M
1460M
1493M
w
q
1465M
Illuminated
<Example>