Boss Audio Systems GT-10B User Manual

 

This feature allows you to make tone settings based on the 
equipment you are using and the tonal image you want to 
create.

Used for making settings related to the GT-10B’s operating 
environment.

 

BASIC TONE lets you create sounds easily by choosing set-
tings close to the musical genre and the feel of the song you 
want to compose.

 

POP

Pop sound

ROCK

Rock sound

METAL

Metal sound

PUNK

Punk sound

R&B

Rhythm&Blues sound

FUNK

Funk sound

JAZZ

Jazz sound

SOLO

For solo play

SYNTH

Synth Bass

 

EDGE

Produces a crisp, distinctive tone.

SMOOTH

Produces a smooth, warm tone.

SOFT

The distortion or the compression effect be-
comes mild.

HARD

The distortion or the compression effect be-
comes strong.

 

435Hz–445Hz

This sets the reference pitch.

 

Mute

The tuning sound is not output.

Bypass

The tuning sound is output.

 

• When OUTPUT is set to “Bypass,” and Tuner is 

set to ON, you can adjust the volume of the direct 
sound by operating the EXP Pedal.

• OUTPUT is set to “Bypass” when shipped from 

the factory.

 

Bass 1–
Bass 3, 
USB In

You can store three separate tone configurations 
tailored to the basses you intend to connect (Bass 1 
through 3). Select USB In when you’re inputting au-
dio from a computer via USB.

 

-20–+20dB

Input volume from input jack. 

 

-20–+20dB

Adjusts the ultra high frequency range tone.

 

-12–+12dB

Adjusts the low frequency range tone.

 

-12–+12dB

Adjusts the middle frequency range tone.

 

20.0Hz–
10.0kHz

Specifies the center of the frequency range that will 
be adjusted by the Mid Gain.

 

0.5–16

Adjusts the width of the area affected by the EQ 
centered at the Mid Freq. 
Higher values will narrow the area.

 

-12–+12dB

Adjusts the high frequency range tone.

GT-10B_e.book 134 ページ ２００８年２月２６日　火曜日　午後３時３０分