Boss Audio Systems GT-10B User Manual

 

-20–+20dB

This controls the global threshold level for the noise 
suppressor settings in each patch. This feature is effec-
tive when you connect a different bass or for adjusting 
for changes in noise levels in the performance venue. 
It does not affect the settings in each individual patch.

 

To use the settings contained in the individual patches, set 
this to 0 dB.

 

0–200%

This controls the global reverb level for the reverb 
settings in each patch. Adjusting this reverb level is 
effective for adjusting to the acoustics of the perfor-
mance space. It does not affect the settings in each 
individual patch.

 

To use the settings contained in the individual patches, set 
this to 100%.

 

0–200%

Adjusts the volume level of the digital audio signals 
output to the USB (Computer).

 

0–200%

Sets the volume level of the mixed digital
audio signals from USB (Computer) when Input Se-
lect is set to “Bass 1–3.”

 

This sets the output reference level to match the equipment connect-
ed to the OUTPUT jack.

-10dB

Choose this when connected to a bass amp.

+4dB

Choose this when connected to a recorder, mixer, or 
other line device.

 

This sets the signals to be output from the SUB OUTPUT (XLR) 
jacks.

L/R

The GT-10B’s stereo output is output as is, without 
change. Set to L/R when recording in stereo or 
sending stereo signals to a PA.

Effect/
Direct

Output from SUB OUTPUT L jack is the GT-10B’s 
stereo output mixed to mono, output from SUB 
OUTPUT R jack is the sound before effect (mono) 
directly.

 

The INPUT SELECT, INPUT LEVEL and PRES. 
parameters are enabled in the input sound.

 

For recording, you can record the direct bass sound on a 
separate channel, then later on you can remix the direct 
sound with the effect sound during mixdown.

 

0–100

Adjusts the level of the audio signals output from 
the SUB OUTPUT (XLR) jacks.

 

The SUB OUTPUT level cannot be adjusted with the 
OUTPUT LEVEL knob

 

Off, On

Switches the Phrase Loop function on/off. 

 

Performance

This records the sound after it passes through 
the effects.
This lets you achieve a rich variety of perfor-
mances by combining different tones. 

Patch Edit

This records the sound before it passes through 
the effects, and applies the effects during loop 
play.
This enables you to adjust effects or compare 
patch tones.

 

Off

The BANK pedals are not used for operation of 
the Phrase Loop feature. These are used as bank 
switch pedals.

 

Phrase Loop can be controlled by assigning the 
Phrase Loop feature to any of the CTL 1 through 4 
etc. and maintaining the BANK pedals’ bank 
switching function.

 

On

The BANK pedals are used for operation of the 
Phrase Loop feature.

 

Mono

Phrases are recorded in mono.

Stereo

Phrases are recorded in stereo.

 

0–120

Sets the phrase playback volume.

 

Clear Only

When you press [BANK 

 

▲

 

] while the Phrase 

Loop feature is on, the recorded data is cleared 
and then GT-10B switches to STANDBY mode.

Mute/Clear

When you press [BANK 

 

▲

 

] while the Phrase 

Loop feature is on, the performance of the re-
corded phrase is muted (the recorded data is 
not erased).
If you then press [BANK 

 

▲

 

] again while the 

phrase is muted, the recorded data is cleared 
and then GT-10B switches to STANDBY mode.

 

Skillful use of muting lets you combine your own 
performances with prerecorded phrases at the timing 
you want.

GT-10B_e.book 135 ページ ２００８年２月２６日　火曜日　午後３時３０分