Hughes Modem dw6000 User Manual

Your DIRECWAY System was completely assembled by the professional 
installer. Should you need to move the DW6000 to another location, you would 
not have to disassemble it. You would simply disconnect the receive, transmit, 
and Ethernet cables and unplug it from the power strip or surge protector. Then 
move it to the new location and reconnect all the cables as shown in Figure 1.

Be aware that if you move the DW6000 you may have to reroute, or add to, the 
coaxial cable that runs from the ground block near the satellite antenna to where 
the DW6000 is installed. Check the cable requirements in the satellite antenna 
installation manual for your satellite antenna before you do this.

You may not service the coaxial cable that runs from the ground block to the 
satellite antenna, or the satellite antenna itself. Only certified professional 
installers are allowed to do that. 

Keep the convection cooling vents free from blockage. Dust the unit as often as 
needed with a soft, damp cloth. Do not use solvent or abrasive powder when 
cleaning.

No internal cleaning or service is required. The DW6000 does not contain user 
serviceable parts. Opening or tampering with the unit will void its warranty. 

Figure 1: DW6000

Transmit cable
(Satellite Out)

AC power
cord

Ethernet
cable

E

th

er

n

Receive cable
(Satellite In)

Power
supply

DC power
cord

Surge protector