Sony Water Dispenser 2 User Manual

  

 Chap

te

r 14 

Sn
aps

ho
ts

162

Snapshot Operations From the Numeric Keypad Control Block

The display shows the name of the reference region and the number of the  
register previously recalled for that region.

Enter the desired register number from the numeric keypad.

The entered register number appears in the display.

To apply temporary attributes, press the following buttons, turning them 
on.

a) When Xpt Hold mode is selected in setup. 
b) When Key Disable mode is selected in setup. 

• The cross-point hold and key disable settings are maintained until you 

next press the [XPT HOLD] button.

• Applying temporary attributes does not affect the contents of the 

register.

• It is not possible to apply temporary attributes to a master snapshot.

Press the [ENTER] button.

This recalls the specified snapshot, and the reference region name and 
recalled register number appear in the display.
If you applied the effect dissolve or auto transition temporary attributes in 
step 

, the corresponding buttons go off.

When a master snapshot is recalled, the region selection buttons light 
according to the saved region information.

After saving a snapshot, to cancel the recall, press the [UNDO] button.

Cross-point control 
block

A/B bus cross-point 
hold

[XPT HOLD] button in the 
background A/B bus

Key cross-point hold

[XPT HOLD] button in the key bus 

a)

Key disable

[XPT HOLD] button in the key bus 

b)

Numeric keypad 
control block

Effect dissolve

[+/

−

/EFF DISS] button

Auto transition

[CLR/AUTO TRANS] button