SimpleTech ZeusIOPS User Manual
Zeus
IOPS
3.5-Inch Fibre Channel Solid State Drive Product Manual Rev. 1.0
25
M
OUNT
T
IME
The amount of time required to initialize and mount a Zeus
IOPS
SSD varies according to the operating
system (Windows®, Linux®, etc.) and the storage capacity of the drive.
A
CCESS
T
IME
Unlike a magnetic rotating disk, the Zeus
IOPS
SSD has no moving read/write head or platter. The
access time ranges from 20
μsec to 120μsec. The actual access time may be affected by the
operating system and the storage capacity of the drive.
D
ATA
T
RANSFER
R
ATES
The data transfer rates of the SSD are outlined in Table 2. Access times are measured under nominal
temperature and voltages from a representative sample of the drive. The access times are measured
from receipt of last byte of the Command Descriptor Block (CDB) to the request for a Status Byte
Transfer to the Initiator, excluding Connect/Disconnect.
temperature and voltages from a representative sample of the drive. The access times are measured
from receipt of last byte of the Command Descriptor Block (CDB) to the request for a Status Byte
Transfer to the Initiator, excluding Connect/Disconnect.
Table 2.
Data Transfer Rates
Parameter
Value
Units
Average Access
20 - 120
μsec
Average Latency
0
m/sec
Sustained Read
200
Megabytes/sec
Sustained Write
100
Megabytes/sec
Duplex Burst Read
400
Megabytes/sec
Duplex Burst Write
400
Megabytes/sec
Minimum Sector Interleave
1:1