SimpleTech ZeusIOPS User Manual

Page of 84
26
Zeus
IOPS
 3.5-Inch Fibre Channel Solid State Drive Product Manual Rev. 1.0
E
RASE
 T
IMES
The time required to erase a Zeus
IOPS
 SSD varies according to the total capacity of the drive. The 
Erase utility will erase every physical memory storage location that can be accessed by the host 
interface. It will also destroy any saved messages. Once initiated, the SSD will be offline and the host 
will be unable to access the drive. Once the erase operation is completed the SSD will be restarted. 
If power ceases during this operation, the operation will be restarted when power is restored. See 
Table 3
.
Table 3.
Erase Times
S
ANITIZE
For sensitive data that requires more stringent security measures, the SSDs are designed to comply 
with industry-standard data protection methods. The SSDs support the sanitize standards as detailed 
in DoD 5220.22-M, AFSSI 5020 and NSA 130-2. The Sanitize feature will erase every physical 
memory storage location and then will write data patterns to all possible NAND locations that are 
accessible to the host system. It will also destroy any saved messages. The time required to sanitize 
a Zeus
IOPS
 SSD varies according to the drive capacity and the sanitize type. Each sanitize type 
requires different levels of erase/write cycles. If power is lost during this operation, the operation will 
be restarted when power is restored. See Table 4.
Table 4.
Sanitize Times and Standards 
Capacity
Erase Time
18 GB
30 sec
36 GB
60 sec
73 GB
120 sec
146 GB
240 sec
Standard
DoD 522.22-M
AFSSI 5020
NSA 130-2
Capacity
Minutes
Minutes
Minutes
18 GB
6
6
18
36 GB
12
12
36
73 GB
24
24
72
146 GB
48
48
144