Schneider Electric Communication Drivers User Manual
Functions
144
X-Way Test tab
This tab is used to test the basic operation of an X-Way driver:
The table below describes the different zones of the window:
Driver Group
Field
Description
Name
Name of driver to be used for the test (Uni-Telway, FPC10, etc).
Driver number
Instance number of driver to be used for the test (usually 1).
Remote Address
X-Way remote station address in the format "network.station.gate". The
address "0.254.0" is the default address (terminal port for example).
address "0.254.0" is the default address (terminal port for example).
For a network connection, (such as Fipway), the user must complete
this field: "3.5.0" to address station 5 of network 3. Gate 0 corresponds
to the system server gate of the station in question.
to the system server gate of the station in question.
Local Address
Internal address used locally by the driver. The driver completes this
field automatically for information purposes when the connection
becomes effective.
becomes effective.
Request Group
Field
Description
Request
Name of driver to be used for the test (Uni-Telway, FPC10).
Type
Type of request. Different sizes of mirror requests are suggested, as
well as reading the PLC %S6 system bit.
Delay
Wait timeout in ms for the response to the transmitted request (time
out).
Status
Status of connection, " disconnected ", " connecting... " or
" connected ".
" connected ".
Management properties of SCHNEIDER drivers
MODBUS SERIAL Driver
PCX57 Driver
UNITELWAY Driver
FPC10 Driver
FPP20 Driver
MODBUS Test
XWayTest
OK
MIRROR (3 bytes)
Request
Request:
XIP Driver
DRIVERS Manager
Uni-Telway
Driver
Name:
3000
Status: disconnected
Type:
Delay (ms)
1
Driver number:
0.254.0
Remote address:
Local Address:
:$
<
Connect
Launch
Further information...
Concerning