Schneider Electric Communication Drivers User Manual

Functions

146

   

The windows corresponding to these tabs are described in the description of the 
configuration for each driver:

l

for the  Uni-Telway driver  tab: 

l

if using a serial port see Driver configuration screens, p. 20,

l

if using a TSXSCP114 card see Driver configuration screens, p. 30,

l

for the  FPC10 driver  tab see Driver configuration screen for Windows NT, p. 48,

l

for the  FPP20 driver  tab see How to install the driver, p. 40,

l

for the  XIP Driver  see Driver configuration screen, p. 80,

l

for the PCX 57 Driver tab:

l

when using Windows NT see Configuration of the ISAWAY driver for Windows 
NT, p. 90,

l

when using Windows 98\2000\XP see Configuration of ISAWAY driver for 
Windows 98\2000\XP, p. 95, 

l

for the PCI 57 driver tab see Configuring the PCIWAY driver for windows 
2000\XP, p. 114,

l

for the USB Driver tab see State of the USB link, p. 139.

If Modbus Plus protocol is being used, then the station address is 

shown here.

Status of connection, "disconnected", " connecting... " or "connected".

Opens an internal communication channel on the selected driver.

Launch request transmission to the station defined in the Remote IP 

address field of the Link Parameters group.

Displays X-Way Manager version and copyright details.