Schneider Electric Communication Drivers User Manual
Functions
145
Modbus Test tab
This tab is used to test the basic operation of a Modbus driver:
The table below describes the different zones of the window:
Command buttons
Object
Description
Connect
Opens an internal communication channel on the selected driver.
Launch
Launch request transmission to the station defined in the Remote
address field of the Driver group.
Further
information...
Displays system information about the driver. This button is active in
online mode only.
Concerning
Displays X-Way Manager version and copyright details.
Link Parameters Group
Field
Description
Protocol
Name of protocol used (USB, TCP, Serial Modbus, Modbus Plus).
Remote IP
address
If TCP is being used, then the IP address or machine name is shown
here
Slave No.
If Serial Modbus protocol is being used, then the slave no. is shown
here.
Management properties of SCHNEIDER drivers
SCP114 Driver
MODBUS SERIAL Driver
PCX57 Driver
UNITELWAY Driver
PLC USB Driver
DRIVERS Manager
FPC10 Driver
FPP20 Driver
MODBUS Test
XWayTest
Requests
Link Parameters
OK
Connect
Launch
Concerning
USB
Protocol:
90.0.0.1
Remote IP address:
1
Slave no.:
0
Master Path : DM
0
0
0
0
Request:
Status: Disconnected