Pitney Bowes DM230L User Manual

1.  Is power cord plugged into both mailing machine base and wall outlet?  

Make sure the power cord is not connected to a switched wall outlet.

2.  Check power lamps on mailing machine base and control centre. Both 

lamps should be on. 

3.  The control centre may be in sleep mode. Press any key to wake it. 

HINT: If the  
Control Centre 
display prompts 
“Remove Env” but 
no envelope is  
present, check if 
there is a  
partially-fed tape  
on the feed deck.

To clear envelope:
1.  Pull feed deck release 

knob forward (A) and 
lower deck as shown.

2.  Carefully pull envelope 

out from right (B).

3.  Make sure deck is clear 

of paper fragments.

4.  Close deck.

To avoid envelope stalls:
1.  Make sure your envelopes meet our published specifications.  

See Chapter 1.

2.  Feed envelopes correctly. See the instructions in Chapter 3. Don't try to 

feed oversize envelopes through the machine. Use tape strips instead.