Hughes DW6000 User Manual

7. Select a satellite/transponder combination that corresponds 

with the work order or the current transponder assignment 
from the drop down list and select Next. A 

 screen 

appears. See Figure 19. If you are using OPI to point the 
antenna you must check the 

Enable OPI Display

 box at the 

bottom of the screen.
If you wish, you can enter the location manually. 

Enter 

location manually

 in Figure 18 must be checked. When you 

select Next the Transponder - Manual Entry screen appears. 
See Figure 20. Enter the longitude, frequency, and symbol 
rate, and select the polarization.   Then select Next and the 
verification screen appears.

Figure 18: Choose transponder

Figure 19: Transponder - Verification