Hitachi Microscope & Magnifier S-3400N User Manual
2.3 Graphical User Interface (GUI)
2 - 40
2.3.7.2 Focusing Position (WD) WORKING DISTANCE Window
This block allows you to set a focusing position.
This block allows you to set a focusing position.
Fig. 2.3-26 Focusing Position (WD) Window
(1) WD setup/display window
This window displays the current working distance (the focusing position calculated from the
lens current).
When a working distance value is selected from the pull-down list, focus point will be set to
the specified working distance. The box also indicates present focal length if varied with
manual focusing. This window can be used for focusing purposes when the Z-axis of the
stage is moved or when it is necessary to set the WD accurately for EDX analysis purposes.
lens current).
When a working distance value is selected from the pull-down list, focus point will be set to
the specified working distance. The box also indicates present focal length if varied with
manual focusing. This window can be used for focusing purposes when the Z-axis of the
stage is moved or when it is necessary to set the WD accurately for EDX analysis purposes.
(2) WD micro-adjustment button
By clicking the Up and Down arrows, you can adjust the WD in 0.1mm increments.
(3) WD setting slider
The slider indicates the current WD. Also, by moving the slider with the mouse to the right
and left, you can change the WD. By clicking the side of the slider, you can adjust the WD
in 1 mm increments.
and left, you can change the WD. By clicking the side of the slider, you can adjust the WD
in 1 mm increments.
(4) Analysis position setting button
This button can be used to set the WD at 10 mm, such as during an EDX analysis.
This button sets a WD without the moving the stage itself.
This button sets a WD without the moving the stage itself.
WD setup/display box
WD micro adjustment button
WD setting slider
Analysis position setting button