Bosch Appliances DVR DVR4C User Manual
Bosch Security Systems | Version 1.1
DVR4C | Installation Manual | Menu system
EN | 21
4.8
Disk Manager >
The Disk Manager menu gives access to information on the
internal hard disk(s). The status of the recorded video and
associated data is also accessed via this menu.
>> HISTORY
•
All system events are listed on a History log which
cannot be deleted or changed.
•
Select a time frame to search by entering the start and
end time.
•
To search for a specifc type of event, select a filter
option: All, Input Alarm, Motion, Text, Error or Status.
•
Select Start to start the search.
•
The history log includes remote login/logout, record
start/stop, time/date change, hard disk format, Videoloss,
Fan fail, Disk full, Disk fail, Power On/Off.
>> RECORDING SETUP
>>> RECORDING MODE
•
When set to Continuous (default), the DVR
overwrites older images when the hard disk is full.
•
When set to Linear, the DVR stops recording when
the hard disk is full and the administrator has to
delete video manually.
>>> DISK FULL ALARM WARNING
•
A warning message is generated when the used disk
space exceeds the disk full warning percentage set.
•
Select from 1 to 100% (default 95%).
>> BLOCK PLAYBACK
•
Block playback of video that is older than a certain time.
•
Select from "No block" (default), "24 hours", "2 days",
"3 days", "4 days", "5 days", "6 days", "7 days", "14
days", "21 days", "28 days" or "31 days".
>> DELETE
•
Data can be deleted from a designated time frame. This
can be set from the beginning of the recorded data
(fixed) to a user defined time.
•
Select the date and time up to which the recorded data is
to be deleted and then select Delete.
>> STORAGE SETUP
•
The storage setup menu provides a way to enable or
disable internal hard disks and to view the status of
connected hard disks.
•
Disk shows the internal disk that has been detected.
•
Size indicates the disk size of each disk in GB.
•
Set Enabled to either Yes and No to enable or disable a
disk. If a disk is disabled, a message warns you that
disabling a disk causes data loss. A new hard disk can be
formatted if Enabled is set to Yes.
•
Status indicates the status of the disk. OK indicates that
the disk is operating correctly and can be used for
recording; Fail indicates a problem.
>> STATUS OVERVIEW
•
The status overview menu provides information on the
status of the connected hard disks.
•
Earliest/Latest Recording indicates the times of the
earliest and latest recordings on the disk.
•
Disk capacity indicates the total hard disk size in GB.
•
Used space indicates the hard disk space that has been
used by recordings.