Bosch Appliances DVR DVR4C User Manual

Bosch Security Systems | Version 1.1

DVR4C | Installation Manual | Menu system

EN | 20

>> MISCELLANEOUS

The DVR firmware version is shown here. Select Factory 

defaults to set all parameters, except IP address, subnet 

mask, default gateway and disk setup, to their default 

values.

>>> SAVE SETTINGS

•

Select Save Settings to save the current settings to a 

USB memory stick.

>>> LOAD SETTINGS

•

Select Load Settings to load previously saved 

settings from a USB memory stick into the DVR.

>>> UPDATE FIRMWARE

•

For authorized personnel only! 

Select Update Firmware to load new firmware from a 

USB memory stick into the DVR. The new firmware 

overwrites the current firmware.

4.7

Profiles >

The recording schedule is divided by weekday day, 

weekday night, weekend day and weekend night. Users can 

configure start and end time of each schedule.

>> PROFILES

>>> CURRENT PROFILE

•

Shows the profile (Weekday - Day, Weekday - Night, 

Weekend - Day, Weekend - Night) that is currently 

active.

>>> WEEK START AND WEEK END

•

Any day from Monday to Sunday can be used as a 

start date or end date of a week.

>>> DAY START AND DAY END

•

Any time from 00:00 to 23:59 can be used as a start 

time or end time of a day.

•

If the begin time is later than the end time, then the 

profile is active from the end time until the begin 

time on the next day.

>> EXCEPTION DAYS

Exception days can be set, apart from the four standard 

periods, e.g. Christmas. Start time and date, and duration of 

the Exception days can be configured.

•

Up to 30 exception days can be set that override the 

calendar list.

•

Use the up/down keys to move to an exception entry and 

press the select key to start editing.