Denon AVR-3808CI User Manual

s

Set the main zone volume setting.

Make a setting for maximum volume.

 

 

 

This sets the volume set when the main zone’s power is turned on.

 

 

This  sets  the  amount  of  attenuation  of  the  volume  when  the  mute 
mode is set in the main zone.

 

 

d

Remove input sources that are not used from the display.

 

• Input sources being used in the various zones cannot be deleted.
• Input sources set to “Delete” cannot be selected from GUI menu 

“Source Select” or using the SOURCE SELECT knob on the main unit 
or SOURCE SELECT button on the remote control unit.

f

Make GUI related settings.

Make screensaver settings.
Use the screensaver to prevent burn-in on the monitor screen.
When set to “ON”, the screensaver is activated if there is no activity 
for about 3 minutes.

 

Change the GUI background.

 

 

 



Select the video output signal format to match the monitor.

 

When a format other than the video format of the connected monitor 
is set, the picture will not be displayed properly. Use the procedure 
described below to change the video format.

q

  Press  and  hold  the  STATUS  and  RETURN  buttons  for  at  least  3 

seconds.

    “Video Format” appears on the display.
w

  Use the o p button to make the setting.

e

  Press the ENTER, MENU or RETURN button to complete the setting.

Text information display.

 

Master volume display during adjustment.

 

This sets the time the on-screen display is displayed when an operation 
is performed.

 

 

 

g

Change the Quick Select name.
Up to 16 characters can be input.

 

 

! “ # % & ’ ( ) * + , - . / : ; < = > ? @ [ \ ] (space)