Denon AVR-3808CI User Manual



This sets the language used on the display 
screens.

F 

Menu tree F

 

 

q

  Press  and  hold  the  STATUS  and  RETURN  buttons  for  at  least  3 

seconds.

    “Video Format” appears on the display.
w

  Use the ui button to set “GUI Language”.

e

  Use the o p button to make the setting.

r

  Press the ENTER, MENU or RETURN button to complete the setting.

Use this procedure to select the input source and make the settings 
related to playing input sources.

 

Source Select 

F 

Menu tree F

G

Operation on the main unitG

Turn the SOURCE SELECT knob.
b

 If “Rec Select” or “Video Select” is selected for the input source, 

press the SOURCE button before turning the SOURCE SELECT knob.

G

Operation on the main remote control unitG

Press the SOURCE SELECT button.
The desired input source can be selected directly.

(Main unit)

(Main remote control unit)

• Connection  to  the  network  and  specifi c  settings  are  required  to 

update the fi rmware. For details, see page 20, 32.

• Do not turn off the power until updating is completed.
• Normally there is no need to use this function, aside from the cases 

described below.

⋅  The  Firmware  Update  function  is  only  used  for  updating  the 

fi rmware (free or for a charge) via the Internet, for example for the 
purpose of adding functions to the AVR-3808CI in the future.

⋅  Information  regarding  the  Firmware  Update  function  will  be 

announced  on  the  DENON  web  site  each  time  related  plans  are 
defi ned.

⋅  A  broadband  connection  to  the  Internet  is  required  to  use  this 

function (v page 20).

⋅  Even with a broadband connection to the Internet, approximately 1 

hour is required for the updating procedure to be completed. Once 
updating starts, normal operations on the AVR-3808CI cannot be 
performed until updating is completed.

  Furthermore, updating the fi rmware may reset the backup data for 

the parameters, etc., set for the AVR-3808CI.

Updating failed.

Failure to log into server.

Server is busy. Wait a while then try again.

Failure connecting to server.

Failure registering to server.

b

 If the display reads as shown below, check the settings and network 

environment, then update again.

A3

Update the fi rmware of the receiver.

 :

Execute the update process.
When  updating  starts,  the  power  indicator  lights  red.  “Updating 
zzz

”  is  shown  on  the  display  during  updating.  Once  updating  is 

completed, “Updating complete” is displayed.
“Latest  fi rmware”  is  displayed  when  the  fi rmware  is  the  latest 
version.