Bosch Appliances Home Security System DVA-16K User Manual

RAID Subsystem DVA-16K | Installation Manual

Subsystem Monitoring  | en 31 

Bosch Security System

F.01U.027.799 | V2 | 2008.08

Different controller environmental and operational parameters (like temperature, etc.) have 

been assigned a range of values between which they can fluctuate. If either the upper or lower 

thresholds are exceeded, an audible alarm will automatically be triggered. The alarm will also 

be triggered when an active component on the RAID subsystem fails. If the RAID subsystem 

manager is onsite and hears an alarm, the manager must read the error message on the LCD 

screen or PC terminal to determine what has triggered the alarm. After determining what has 

occurred, the RAID subsystem manager must take appropriate actions to rectify the problem.

Table 4.7 shows the default threshold values for the RAID subsystem. If any of these values are 

surpassed, the alarm will sound:

The thresholds in Table 4.7 are default threshold values and may be changed.

If any of the following devices fail, the audible alarm will be triggered:

•

RAID controller module

•

Cooling modules

•

PSU modules

•

BBU

•

Hard drives

If an alarm is triggered it is necessary for you to determine the problem. If the audible alarm is 

ignored and the problem is not rectified, unexpected damages may occur.

+3.6V

+2.9V

+5.5V

+4.5V

+13.2V

+10.8V

90ºC

5ºC

80ºC

5ºC

40ºC

0ºC

Default Threshold Values

When the temperature exceeds a preset threshold, the controller’s charger circuits will stop 

charging. You will then receive a message that says “Thermal Shutdown/Enter Sleep Mode.” 

When the temperature falls back within normal range, the battery will resume charging.