Siemens TV Converter Box 611 User Manual

Motor assembly 

 

6.1 Motor assembly 

 

WARNING 

 

The machine construction must be designed in such a way that both the rotor and the stator 

are each secured on one side only. See "Installation examples". If they are secured on both 

sides, this can result in significant material deformation in the machine construction due to 

thermal expansion, which could destroy the motor. 

 

 

 

DANGER 

 

Defective connecting cables can cause an electric shock and/or material damage (e.g. by 

fire). 
When installing the motor, make sure that the connection cables... 
 

are not damaged 

 

are not under tension 

 

cannot come into contact with any rotating parts 

Note the permissible bending radii (see "Interfaces"). 
The motor must not be held or pulled by the cables. 

 

 

 

DANGER 

 

Electrical shock hazard! When an installed torque motor rotates, potentially dangerous 

voltages are induced at the cable ends of the motor. 
Insulate terminals and leads in open cable ends or take measures to prevent torque motors 

that have been installed from rotating. 
There is also a risk of compression. 

 

 

 

WARNING 

 

Sharp edges can cause cuts and falling objects can injure feet. 
Always wear work gloves and safety shoes. 

 

 

1FW6 Built-in torque motors 

82

 

Configuration Manual, 05/2009, 6SN1197-0AD00-0BP7