Panasonic Attune II Installation Instruction

11

w

wChanging the password

Change the password.

1

2

Touch the [Edit] button, and then input the [Old 
Password], [New Password], and [Confirm New 
Password].

[Old Password]
Input the current password.
[New Password]
Input the new password.
[Confirm New Password]
Input the new password for confirmation.

w

p You can input up to 8 alphanumeric characters and 

symbols as the password.

w

p The input characters are displayed as “

*

”.

w

p Change the password at regular intervals for security 

purposes.

3

w

p The password is changed.

w

wSetting the network address

This function is used to set the network for
the Center Module.

1

[DHCP]
This function is used to set whether to use the DHCP 
function.

OFF:   Set the IP address manually.

Input the [IP Address], [Subnet Mask], and 
[Default Gateway].

ON:   Use the DHCP.

Set the IP address using the DHCP function. If 
no IP address is obtained from the DHCP server, 
a new IP address is set automatically (Auto IP). 
You do not need to input [IP Address], [Subnet 
Mask], or [Default Gateway].

Default setting: OFF

w

p When DHCP is set to OFF, set the IP address so that 

it will not be the same as that of another device.

w

p When DHCP is set to ON, set the DHCP server so 

that devices that do not use the DHCP function do 
not have the same IP address. For server settings, 
contact the network administrator.

w

p When DHCP is set to ON, if an IP address cannot 

be obtained from the DHCP server, search for 
an unused IP address between 169.254.1.0 and 
169.254.254.255, and set it as the IP address.

WX-CC411_PGQP1742ZA_SI_.indb   11

2014/01/17   18:11:15