Panasonic Attune II Installation Instruction

9

This function is used to select an item to set from the 
Settings screen and perform the required settings.

w

wInstallation settings 

This function is used to perform the basic settings for this 
unit. Be sure to perform these settings after installing this 
unit.

w

wSetting the date and time

This function is used to set the date, time, and daylight 
saving time for the Center Module.

w

wSetting the current date and 

This function is used to set the current date and time for the 
Center Module.

1

2

w

p The date and time display on the LCD display is 

updated. For the inputting method, refer to “Inputting 
the date and time” (p.7). You can input the date and 
time from 2013/1/1/00:00 to 2035/12/31/23:59.

w

p The date and time on this unit is set with the following 

order: month / day / year hour:minute

w

p The time is displayed as a 24-hour clock.

w

p The date and time on the LCD display are also 

displayed according to the above rules.

3

w

p The current date and time displayed on the LCD 

display are updated.

w

p If you set daylight saving time while setting the date 

and time, a warning screen is displayed. Before 
setting daylight saving time, complete the date and 
time setting.

w

p After the date and time are set, if you turn the 

power OFF and then ON after 1/1/2036, they will 
be initialized to 1/1/2000. On and after 2036/1/1, 
schedule functions such as the greeter message and 
reminder message do not operate.

WX-CC411_PGQP1742ZA_SI_.indb   9

2014/01/17   18:11:13