Manualsbrain.com
  1. Manuals
  2. Brands
  3. Panasonic
  4. Attune II
  5. Installation Instruction

Panasonic Attune II Installation Instruction

Download
Page of 90
19
English
Store settings [Store Settings]
This function is used to perform operation settings for stores.
w
wSetting the nighttime volume
This function is used to reduce the volume level of the voice 
output from the order post speaker. Use this function to 
reduce the volume level of the voice output from the order 
post to decrease the noise volume at night.
1
On the Settings screen, touch the [Store 
Settings] button, and then the [Nighttime 
Volume] button.
 
2
[Nighttime Volume] 
Set whether to use the Nighttime Volume using 
the [OFF], [ON], or [AUTO] buttons.
OFF:  
 The volume level of the order post speaker is 
unchanged.
ON: 
 The volume level of the order post speaker is 
reduced.
AUTO:   The volume level of the voice output from the 
order post speaker is reduced automatically 
every day, based on the set time to start and 
time to end the nighttime volume function.
Default setting: OFF
3
[Level] 
Set the voice suppression level.
Set to -20 dB to 0 dB (in steps of 2 dB).
Default setting: 0 dB
4
[Start Time][Ending Time] 
When you select “AUTO”, set the times to start 
and end the Nighttime Volume.
Touch the [Edit] button for the [Start Time] or [Ending 
Time] to set the time.
w
p When setting the Nighttime Volume spanning two 
days, set the time to finish earlier than the time to 
start.
Note
5
Touch the [Set] button.
w
p The setting for the nighttime volume is entered.
w
p When WX-CC412 is used, this setting is applied to 
both lane A and lane B.
w
p When the nighttime volume setting is enabled, the 
ASLC function does not operate regardless of its 
setting. For details on the ASLC, refer to “Setting the 
DSP” (p.26).
Note
WX-CC411_PGQP1742ZA_SI_.indb   19
2014/01/17   18:11:22