D-Link DSC-100 User Manual

Page of 28
 
8
Video Recording Mode 
Press and hold the Shutter Release button. The camera will 
record continuous video until you release the button. When 
recording, the LED light on the front panel will stay on 
continuously. 
 
Continuous snap shot mode 
The continuous snap shot mode allows you to set a time 
between continuous snap shots. The camera will continue to 
take pictures until either the memory is full, or you cancel the 
operation. Press and hold the Mode button for 3 seconds. The 
"
" sign will start blinking. Press the Forward "
" or 
Backward "
" buttons to set the time interval between 
snapshots. The timed interval can be set from 1 to 60 minutes. 
Press Shutter Release button to apply setting changes. Then 
press the Shutter Release button again to start the continuous 
mode snap shots. Press the Power button to stop shooting. 
 
Changing Resolutions 
The DSC-100 takes all images at 352x288 resolution. Changing the 
image quality will change the compression rate to make smaller image 
files. Taking pictures at the Low setting will allow you to hold more 
photos on the camera. Once the camera is full, you will need to 
download your photos to your computer and erase the photos on the 
camera.   
Press the Forward "
" button to change to the next image quality. 
High image quality   =   
 
Low image quality    =