D-Link DSC-100 User Manual

 

7

Press and hold the Power button for 3 seconds to power on the camera. 

Then press the Mode button to set the shooting modes. The mode will 

change each time you press the Mode button. 

 

Only one picture will be taken every time you press the Shutter 

Release button. 

 

The camera will take pictures 10 seconds after you press the 

Shutter Release button. The LED light on the front panel will 

start to blink when you press the shutter button and stop 

blinking after 10 seconds.   

 

You can set the camera to take 1 to 10 continuous pictures with 

a 10 second interval using the self-timer mode. Press the Mode 

button until you see the Timer Mode icon appear. Press the 

Mode button for 3 seconds and press the Forward "

" or 

Backward "

" buttons to set the number of pictures to take. 

Click the Shutter Release button to apply the setting changes. 

Press the Shutter Release button again to start taking pictures. 

If you want to stop taking pictures, press the Power button. 

 

Tip:    Use a tripod or other steady support to hold the camera when 

using the self timer or continuous snapshot modes.