D-Link DSC-100 User Manual

 

9

Make sure the camera power is on. Set the mode to your desired 

preference. Locat the subject you want to shoot by looking through the 

viewfinder. 

Note:   If you don’t use the camera for 30 seconds, the DSC-100 will 

automatically power off. 

Note:   The focus range for PC Camera/Webcam mode is 30cm (Macro) 

to 1.5 Meters.   

 

§ Press the Power button for 3 seconds to power on the camera. 

(The LED light on the rear panel will turn green)   

§ Using Viewfinder to locate the object, press the shutter release 

button to take pictures. The image processing time is around 1 

second only 

§ Press the Mode button until the Video Recording icon is 

shown. 

§ Using Viewfinder to locate the object, press and hold the 

Shutter Release button.   

§ The camera will take a continuous video until you release the 

shutter button. 

§ Connect your camera to your PC. The camera will 

automatically power on and switch to PC camera mode. 

§ Run a webcam application such as NetMeeting (available with 

Windows 98, Me, 2000 and included in this package). 

§ Adjust the focus ring to get a clear image.