Bosch HBLP751UC Manual

Page of 80
English 23
time. This is normal and does not affect operation. Do 
not use scouring pads or abrasive cleaners to treat 
discolorations.
In double oven models: Self Clean is only available for 
one oven at a time. The other oven must be turned off.
Avoid These Cleaners
Do not use commercial oven cleaners such as Easy Off®. 
They may damage the oven finish or parts.
Never use scouring pads or abrasive cleaners. Never use 
cleansers containing Clorox ®
Do not use flammable cleansers such as lighter fluid or 
WD-40.
Cleaning Guide
Maintenance
Replacing an Oven Light
Part
Recommendations
Flat Rack
Wash with hot soapy water. Rinse 
thoroughly and dry, or gently rub 
with cleansing powder or soap-filled 
pads as directed. DO NOT clean the 
rack in the self cleaning oven.
If flat racks are cleaned in the oven 
during the self clean mode, they will 
loose their shiny finish and may not 
glide smoothly. If this happens wipe 
the rack edges with a small amount 
of vegetable oil. Then wipe off 
excess.
Telescopic Rack
Wash with soapy water. Rinse 
thoroughly and dry, or gently rub 
with cleansing powder or soap-filled 
pads as directed. Avoid getting 
cleansing powder in the telescopic 
slides. Re-lubrication may become 
necessary. Use only high-
temperature food-grade lubricants to 
re-lubricate slides.
DO NOT clean the rack in the self 
cleaning oven. DO NOT leave the 
rack in the oven during self clean.
If the telescopic rack is cleaned in 
the oven during the self clean mode 
it will loose its shiny finish and will 
not glide smoothly.
Fiberglass 
Gasket
DO NOT CLEAN GASKET.
Glass
Wash with soap and water or glass 
cleaner. Use Fantastik® or Formula 
409® to remove grease spatters and 
stubborn stains. 
Painted 
Surfaces
Clean with hot soapy water or apply 
Fantastik® or Formula 409® to a 
clean sponge or paper towel and 
wipe clean. Avoid using powder 
cleaning agents, steel wool pads 
and oven cleaners.
Porcelain 
Surfaces
Immediately wipe up acid spills like 
fruit juice, milk and tomatoes with a 
dry cloth. Do not use a moistened 
sponge/cloth on hot porcelain. When 
cool, clean with hot soapy water or 
apply Bon-Ami® or Soft Scrub® to a 
damp sponge. Rinse and dry. For 
stubborn stains, use soap-filled 
pads. It is normal for porcelain to 
show fine lines with age due to 
exposure to heat and food soil.
Stainless Steel 
Surfaces
Always wipe or rub in the direction of 
the grain. Clean with a soapy 
sponge, then rinse and dry, or wipe 
with Fantastik® or Formula 409® 
sprayed on a paper towel. Protect 
and polish with Stainless Steel 
Magic® and a soft cloth. Remove 
water spots with a cloth dampened 
with white vinegar. Do not use any 
abrasives such as steel wool pads, 
SoftScrub®, BonAmi® or Clorox ® 
cleansers.
Plastic & 
Controls
When cool, clean with soapy water, 
rinse and dry. Do not use any 
abrasives such as steel wool pads, 
SoftScrub®, or Bon Ami®.
Probe
Wipe with soapy water. Do not 
submerge. Do not wash in the 
dishwasher.
Printed Areas 
(Words and 
Numbers)
Do not use abrasive cleansers. 
When cool, clean with soapy water, 
rinse, dry.
WARNING
Part
Recommendations