Bosch HBLP751UC Installation Instruction

Page of 56
English 9
To remove the oven door:
Placing the Oven Into the Cabinet 
Opening
Note: It is recommended to wear gloves and long sleeves 
to protect hands and forearms from abrasion and 
potential scratches during the lifting processIt is 
also recommended to take off watches and jewelry 
and to wear work shoes during installation for foot 
protection.
When lifting the unit into place avoid grasping the upper 
element to avoid damaging it. See the illustration following 
for the correct lifting point.
1. The unit and its bottom packaging (pallet) should be 
positioned close to and in front of the cabinet opening 
prior to beginning to lift the unit into place.
2. Lift or slide unit into the cabinet cutout without allowing 
the unit base to contact the flooring. 
3. Check that the conduit cable does not fall behind the 
unit during installation. It may help to run the conduit 
into the area it will be connected to (such as an 
overhead or adjacent cabinet) and tape the end down 
so it doesn’t fall out while the unit is being slid into 
place.
1. Be sure to read the 
above WARNING 
before attempting to 
remove the door.
2. Open the door 
completely.
3. Flip levers on hinges 
toward you.
4. Holding the door firmly 
on both sides and 
using both hands, 
close the door gently 
until it stops against 
the levers, about 30º 
from the closed 
position.
5. Carefully lift the door 
up and out of the 
hinge slots. Hold 
firmly; the door is 
heavy.
6. Place the door in a 
convenient and stable 
location unitl you are 
ready to reinstall it.
CAUTION
To avoid damage to the door do not lift, pull or push 
the unit during installation by using the oven door 
handle as a gripping point.