Bosch HBLP751UC Installation Instruction

English 4

This installation manual provides instructions for the 
installation of single ovens, double ovens and combination 
ovens (a single oven combined with with microwave or 
steam oven).

Standalone single and double oven units require no 
pre-assembly. Unless you are installing a combination 
oven, skip over the combination oven pre-assembly 
instructions and go directly to “Electrical Installation” 
which applies to all ovens.

Combination ovens (with microwave or steam oven) 
require the units to be assembled together prior to installing 
the combination unit into the wall cabinet.

Note: The single oven can be installed with a Steam Oven 
or with a Microwave Oven. The installation procedure 
differs between these. The parts contained in the square 
tube parts box are common to both installations.

Note: Do not place the oven into the wall cabinet until after 
mounting the microwave on it using the universal connector 
brackets.
1. The combo service slide assemblies are attached to 

the oven spaced to accept the microwave.

2. Install both universal connector brackets using six of 

the screws provided.  Tighten screws securely, but do 
not overtighten.

Note: The universal connector brackets are interchange-
able for the left and right sides of the oven. Be sure the 
taller vertical edge of the bracket is positioned to the out-
side of the oven.

Oven Bottom trim (1)
Packed in a plastic sleeve, with mounting screws in a 
red bag within the sleeve

Universal connector 
bracket (2)
(in parts box on top of 
oven)

Screws (16)
(in red bag, inside parts 
box on top of oven)

Decorative trim (1)
Packed in bubble wrap, near the oven control panel.

Combo service slide 
assembly (2)*
*  This part is 

preassembled on the 
oven to accomodate 
attachment of a 
microwave.