Pioneer VSX-824-K Owner's Manual

4

61

9



Try making the wireless LAN converter’s advanced settings. 

The wireless LAN converter can be connected to a computer to 

make the advanced wireless LAN settings. For details, see the 

CD-ROM included for the wireless LAN converter. Check the 

settings of the wireless LAN router, etc., then change the 

settings of the wireless LAN converter.
Note, however, that making the advanced wireless LAN 

settings will not necessarily improve the wireless LAN 

environment. Be careful when changing the settings.



The access point is set to conceal the SSID. In this case, the 

SSID may not be displayed on the access point list screen. If 

not, set the SSID, etc., by making the wireless LAN converter 

settings on the receiver manually.



The access point’s security settings use WEP 152-bit length 

code key or shared key authentication. The receiver does not 

support WEP 152-bit length code key or shared key 

authentication.



Network connections cannot be established even when the 

above measures are taken. Reset the wireless LAN converter. 

After this, redo the wireless LAN converter’s settings.

- About resetting

- 1. Check that the wireless LAN converter’s power is on.

- 2. Press the wireless LAN converter’s reset button for at least 

3 seconds.

- 3. Release the reset button.

When the wireless LAN converter is restarted, the resetting 

procedure is completed.





If the problem still persists when connecting your HDMI 

component directly to your monitor, please consult the 

component or monitor manual or contact the manufacturer for 

support.





Video signals that are input from the analog video terminal will 

not output from the HDMI terminal. Signals that are input from 

the HDMI terminal will not output from the analog video 

terminal. Be consistent with the type of cable between input 

and output.



Depending in the output settings of the source component, it 

may be outputting a video format that can’t be displayed. 

Change the output settings of the source, or connect using the 

composite video jacks.



This receiver is HDCP-compatible. Check that the components 

you are connecting are also HDCP-compatible. If they are not, 

please connect them using the composite video jacks.



Depending on the connected source component, it’s possible 

that it will not work with this receiver (even if it is HDCP-

compatible). In this case, connect using the composite video 

jacks between source and receiver.



If video images do not appear on your TV, try adjusting the 

resolution, Deep Color or other setting for your component.



To output signals in Deep Color, use an HDMI cable (High 

Speed HDMI

®/

™ Cable) to connect this receiver to a 

component or TV with the Deep Color feature.





Check that the HDMI setting is set to AMP (

page 39

).



If the component is a DVI device, use a separate connection for 

the audio.



HDMI format digital audio transmissions require a longer time 

to be recognized. Due to this, interruption in the audio may 

occur when switching between audio formats or beginning 

playback.



Turning on/off the device connected to this unit’s HDMI OUT 

terminal during playback, or disconnecting/connecting the 

HDMI cable during playback, may cause noise or interrupted 

audio.





Check the HDMI connections.



The cable may be damaged.



Select ON for the Control with HDMI setting (see 

HDMI Setup 

on page 59

).



Turn the TV’s power on before turning on this receiver’s power.



Set the TV side Control with HDMI setting to on (see TV’s 

operating instructions).

There are cases where you may not be able to route HDMI 

signals through this receiver (this depends on the HDMI 

equipped component you are connecting-check with the 

manufacturer for HDMI compatibility information).
If you aren’t receiving HDMI signals properly through this 

receiver (from your component), please try the following 

configuration when connecting up.

Connect your HDMI-equipped component directly to the 

display using an HDMI cable. Then use the most convenient 

connection (digital is recommended) for sending audio to the 

receiver. See the operating instructions for more on audio 

connections. Set the display volume to minimum when using 

this configuration.

•

Depending on the component, audio output may be limited 

to the number of channels available from the connected 

display unit (for example audio output is reduced to 2 

channels for a monitor with stereo audio limitations).

•

If you want to switch the input source, you’ll have to switch 

functions on both the receiver and your display unit.

•

Since the sound is muted on the display when using the 

HDMI connection, you must adjust the volume on the 

display every time you switch input sources.

This product is Windows 8.1 Compatible and Windows 8 

Compatible.