NIGHT OWL AHD7-441 User Manual
For more information on this product visit
www.NightOwlSP.com
41
CHAPTER 7: MENUS AND SETTINGS
7.5. SYSTEM MENU
7.5.1. General
Set or adjust base DVR settings such as the time, date, and language.
7.5.1. General
Set or adjust base DVR settings such as the time, date, and language.
Channel: choose the channel with a PTZ-enabled camera.
Protocol: select
Protocol: select
Pelco-D or Pelco-P depending on the camera
protocol. Both the DVR and camera should be set to the same
setting.
Baudrate: indicate the frequency of communication to the PTZ
camera. We recommend leaving the default setting.
DataBit: select the amount of data to send during each transmission.
8 bits is standard for all modern data transmissions.
StopBit: select the amount of extra data to send each time a direction
is sent to the camera. The stopbit serves as a buffer between
commands.
Parity: detects corrupt commands sent to and from the PTZ camera.
This should generally be left Disabled.
Cruise:
setting.
Baudrate: indicate the frequency of communication to the PTZ
camera. We recommend leaving the default setting.
DataBit: select the amount of data to send during each transmission.
8 bits is standard for all modern data transmissions.
StopBit: select the amount of extra data to send each time a direction
is sent to the camera. The stopbit serves as a buffer between
commands.
Parity: detects corrupt commands sent to and from the PTZ camera.
This should generally be left Disabled.
Cruise:
Enable or Disable the PTZ cruise function, which allows the
camera to automatically scan the area periodically with no manual
input.
Address: enter an ID number for the PTZ camera, greater than 0. If
using multiple PTZ cameras, ID numbers cannot be the same.
input.
Address: enter an ID number for the PTZ camera, greater than 0. If
using multiple PTZ cameras, ID numbers cannot be the same.