NIGHT OWL AHD7-441 User Manual

For more information on this product visit 

CHAPTER 8: REMOTE ACCESS

Make sure that the DVR is properly connected to the router/modem and 
that you have a computer that works with Windows and connected to 
the same router. 

Follow these steps to determine the basic information about your network:

1. Press the 

Windows and R key at the same time on your computer’s 

keyboard to bring up the Run window. Type “

cmd” and press the Enter 

key.

2. In the command prompt window, type “ipconfig” and press 

Enter. Find 

the section named “Ethernet adapter Ethernet” or “Wireless LAN adapter 
Wi-Fi” and locate the “IPv4 Address” and write this address down e.g. 
192.168.1.123.

3. Change the last three digits of the address to 150 and write this 
address down as well e.g. 192.168.1.150. This will become the IP 
address of your DVR at a later time.