Electrolux E30EW85PPS Owner's Manual

You may wish to set the oven to perform a clean at a later time 
(up to 12 hours later). The end time key will determine when the 
cleaning will stop. 

IMPORTANT!  If you want to set a delayed clean to end 
between 12 and 24 hours, use the user pref key to set the 12hr 
energy saving mode (ES) to Off and also set the clock (CLO) to 
the 24 hr mode.

The end time must be set far enough from the real time to allow 
for the type of clean cycle you select, whether 2, 3, or 4 hours. 
Remember to add 30 to 40 additional minutes of cooling time 
before using the oven for cooking.

In the example below, the clean will start at 4:00 o’clock. The 
number of hours before 4:00 o’clock will be the delay time 
before the clean begins.

   

To avoid possible burns use caution opening the oven door after 
the clean cycle is finished. The oven may still be very hot. Stand 
to the side of the oven when opening the door to allow hot air to 
escape.

Be sure the clock is set with the correct time of day. In 
this example the time of day should be earlier than 
4:00 o’clock. Remove all oven racks. Be sure the oven 
door is completely closed.

Press UPPER or LOWER OVEN.

Press clean - heavy (4hr).

Press cook options.

Press end time.

Enter 8 0 0 using the numeric keys.

Press START.

The oven door will begin to lock and CLn will show in the 
display. Once locked, the oven will display the time 
remaining until clean begins. When the clean cycle 
begins, the display will show the time remaining in the 
clean cycle. 

Press CANCEL at any time to stop clean